• DE EN 中文
FMAD_CEE_Pressebild_1 FMAD_CEE_Pressebild_1

CEE Filter

Share

Share this page

You can share this page with others by sending the URL of the selected page.

Email LinkedIn


Today, SCHURTER's piezo switches are used in many applications, especially in harsh environments. The advantages of using a piezo switch are many, but one of the key benefits is their completely sealed surface, which can be activated by applying minimal force to signal actuation. These switches are offered with a new multicolored illumination.

CEE-connector with filter for 1- and 3-phase applications

The CEE connectors according IEC 60309 are used all over the world for industrial applications and power distribution. The single and three phase connectors can be used for any application with a detachable power cord. Today, noise generating electronics used in machines drive demand for EMI suppression filters in order to meet international EMC standards. This filter is typically mounted on the metal chassis for optimal performance. Traditionally, wires are used to connect the power inlet to the EMI filter mounted separately on the chassis. These wires can vary in length and can cause EMC problems with electromagnetic fields generated by a noise source inside the equipment bypassing the filter! The new CEE connector with integrated filter solves this problem by eliminating these wires and making a direct connection between the filtered connector and its metal shield, which is grounded to the panel cut-out. The fully integrated unit can be front or rear panel mounted directly where the power comes into the equipment.

The new FMAB CEE series is suitable for single phase AC applications. It extends the power entry module concept outlined in IEC 60320, where power input is limited to 16 A. Both the FMAB CEE and the FMAD CEE, which is designed for three phase applications, are rated from 16 up to 32 amperes. They are designed and approved according IEC 60309, UL 1283 and CSA 22.2 no. 8. The voltage rating is 250 VAC (IEC, UL, CSA) and 110 / 125 VAC (UL, CSA). The new filter series are suitable for use in industrial appliances exposed to temperatures ranging from -40 to +85C. Screw terminals provide for ease of installation.


FMAB CEE Circuit diagram

FMAB CEE housing

FMAD CEE Circuit diagram

FMAD CEE housing

Technical data FMAB CEE (1-phase)

 • Rated voltage: 110 / 125 VAC (UL, CSA), 250 VAC

   (ENEC, UL, CSA)

 • Rated currents: 16, 30 A (UL, CSA) / 16, 32 A (ENEC, UL, CSA) at 40 °C

 • Leakage current: max. 0.5 / 1.0 mA

 • Operating temperatures: -40 – 85 °C


Technical data FMAD CEE (3-phase)

 • Rated voltage: 277 / 480 VAC (UL, CSA), 240 / 415 VAC (ENEC, UL, CSA)

 • Rated currents: 16, 30 A (UL, CSA) / 16, 32 A (ENEC, UL, CSA) at 40 °C

 • Leakage current: max. 10.0 mA

 • Operating temperatures: -40 – 85 °C


Applications

 • Equipment with detachable power cord

 • Industrial machines

 • Electrical tools

 • Power distribution

确保安全是我们的职责

技术创新与工程

SCHURTER是保险丝、连接器、断路器、输入系统和EMC产品的领先创新者和制造商,也是全球电子行业的印刷电路板(PCB)组装服务供应商。“成就客户、携手客户”是我们永恒的动力。我们惯于以创新应对各种市场的挑战。我们大胆实现新思想,我们孜孜不倦地支持并鼓励自己的研发团队。

产品线的质量

SCHURTER的产品与服务符合最高质量要求,因为SCHURTER应用了质量-环境-安全管理系统,如ISO 9001、ISO 14001、OHSAS 18001、六西格玛方法和EFQM卓越模型。所有产品均实行国别测试标签,如德国电气工程师协会(VDE)、欧洲标准电器认证(ENEC)、UL、国家强制性产品认证(CCC)等。此外,由于集团各公司和分销商的国际合作网井然有序,客户可从卓越服务和交货期短中获益。

SCHURTER 产品目录是SCHURTER 整个产品系列的概述,是一本方便且简单的参考指南.

cns
cns
prod //cdn.schurter.com